With the next generation of the bent axis motors, Linde Hydraulics expands its customer oriented portfolio of high-quality components for hydraulic systems.

The motors CMF (fixed displacement motor) and CMV (variable displacement motor) are characterized by their high external load and speed capacity. Due to their standardized interfaces, e.g. the plug-in flange according to ISO, the CMF and CMV fit a high variety of applications, without the need of adaptors.
Low windage losses in combination with the low weight of the motor support the cost-effective operation of the application.

The bent axis motors CMF (left) and CMV (right) of Linde Hydraulics

Advantages

• high power density
• high speeds
• low windage losses

Design features

• fixed/variable displacement bent axis motors
• standardized interfaces
• speed sensor optional

Technical Data CMF

CMF		80
Displacement	cc/rev	80
Maximum operating speed	rev/min	4500
Maximum speed*	rev/min	5000
Nominal pressure	bar	450
Maximum pressure**	bar	500
Maximum housing pressure	bar	2.5
Output torque (at Δp=430 bar)	Nm	537
Corner power	KW	258
Weight approx. (without oil)	kg	23
*highest transient speed, that can temporarily occur **highest transient pressure, that can temporarily occur

Technical Data CMV

CMV		60	85**	115	140	170
Maximum displacement	cc/rev	60	85	115	140	170
Maximum operating speed at Vmax	rev/min	4450	3900	3550	3550	3100
Maximum operating speed at Vmin	rev/min	7200	6800	6150	5800	4900
Nominal pressure	bar	450	450	450	450	450
Maximum pressure*	bar	500	500	500	500	500
Maximum housing pressure	bar	2.5	2.5	2.5	2.5	2.5
Output torque (at Δp=430 bar and Vmax)	Nm	402	570	771	939	1140
Corner power	KW	191	238	293	336	378
Weight approx. (without oil)	kg	27.7	36.0	44.0	59.0	62.0
*highest transient pressure, that can temporarily occur **at the planning stage